Description
Avoid inhalation and skin contact
Uses
UV coatings, inks, adhesives, 3D printing resins
Benefits
Fast UV curing, high hardness, chemical resistance, smooth glossy finish
Safety, Compliance & Notes
| Thermal Conductivity | |
| Electrical Conductivity | 0.005 |
| Heat of Formation | -550 to -600 |
| Heat of Vaporization | ~60-65 |
| Structure | CH2=CHCO2(CH2)6O2CCH=CH2cap |
| CAS Number | 13048-33-4. |
| EINECS Number | 235-921-9. |
| Storage & Packaging | Store between 15°C and 30°C. Must contain oxygen (dissolved air) and an inhibitor (typically MEHQ) to prevent spontaneous polymerization. Avoid direct sunlight.Packaging: 200kg HDPE/Steel drums, 1000kg IBCs, or ISO tanks. |
| Product Stewardship | Prevent discharge into drains. In case of spills, use non-combustible absorbent material (sand or earth). |
| Note | If the product crystallizes during winter, warm it gently to 35°C–40°C and mix thoroughly to redistribute inhibitors before use. |
| Notice | This data is for informational purposes as of 2026. Always consult the Manufacturer’s Safety Data Sheet (SDS) for the most current regulatory and handling instructions. |
